NORD Drivesystems BU0180 - Manual (Page 138)

SK 180E Manual for frequency inverters
138 Pre-series version BU 0180 GB-0914
6.2.2 Information (I/O - extension)
Parameter Setting value / Description / Note Device Supervisor
Parameter
set
P170 ... [-01]
... [-02]
Present error
(Present error)
0 ... 9999 Actual error present. Further details in Section 7 "Operating status messages".
… [-01 ] = Current module error
… [-02 ] = Last module error
Possible displayed values:
1000 = EEPROM error
1030 = System bus OFF
2000 = DIP changed
2001 = DIP configuration error / not permissible
2010 = Analog output error
2020 = Inverter does not support SK xU4-IOE (Error not associated with SK 1x0E possible)
P171 ... [-01]
...
... [-03]
Software version
(Software version/ revision)
0.0 ... 9999.9 This parameter shows the software and revision numbers in the module. Array [-03] provides
information about any special versions of the hardware or software A zero stands for the
standard version.
… [-01] = Software Version 1, "Version number": (e.g.: V1.0)
… [-02] = Software Version 2, "Version number": (e.g.: R1)
… [-03] = Software Version 3, "Version number": (e.g.: 0)
P172
Configuration level
(Configuration level)
0 ... 2 This parameter displays the functions or variants integrated into the module.
0 = Internal bus module (SK CU4- …)
1 = External bus module (SK CU4- …)
2 = BUS Technology Unit via SPI