NORD Drivesystems BU0180 - Manual (Page 42)

SK 180E Manual for frequency inverters
42 Pre-series version BU 0180 GB-0914
System
components
Description Data
AS Interface
SK TIE4-M12-ASI
Part. No. 275274502
M12 flanged plug
to connect an AS interface cable
A-coded, 5-pin
PIN 1 ASi+ (/+24V) (brown)
PIN 2 n. c.
PIN 3 ASi- (/GND) (blue)
PIN 4 n. c.
PIN 5 n. c.
Plastic body in yellow
PROFIBUS DP
SK TIE4-M12-PBR
Part. No. 275274500
Kit consisting of M12
flanged plug and
flanged socket
M12 flanged plug
to connect the incoming PROFIBUS DP cable
B-coded, 5-pin
PIN 1 +5V* (brown)
PIN 2 PBR-A (green)
PIN 3 GND * (blue)
PIN 4 PBR-B (red)
PIN 5 n. c.
Plastic body and screw cap in
violet
*PIN 1 and PIN 3 are only
assigned in the M12-flanged
socket
M12 flanged plug
to connect the outgoing PROFIBUS DP cable
CANopen
SK TIE4-M12-CAO
Part. No. 275274501
M12 flanged plug
to connect the CANopen or DeviceNet cable
A-coded, 5-pin
PIN 1 PE (shield) (white)
PIN 2 +24V (brown)
PIN 3 GND (blue)
PIN 4 CAN-H (black)
PIN 5 CAN-L (green)
Plastic body in grey
SK TIE4-M12-CAO-
OUT
Part No. 275274515
M12 flanged socket
to connect the CANopen or DeviceNet cable
A-coded, 5-pin
PIN 1 PE (shield) (white)
PIN 2 +24V (bn)
PIN 3 GND (bl)
PIN 4 CAN-H (black)
PIN 5 CAN-L (green)
Plastic body in grey
Ethernet
SK TIE4-M12-ETH
Part. No. 275274514
M12 flanged socket
for connection of the Ethernet cable
D-coded, 4-pin
PIN 1 TX+ (orange / white)
PIN 2 RX (green / white)
PIN 3 TX- (green)
PIN 4 RX- (orange)
Plastic body in yellow-green
PIN designations for M12 plug connector
The pin designations of the
M12 socket are the corre-
sponding mirror image.