NORD Drivesystems BU0180 - Manual (Page 143)

7 Status messages
BU 0180 GB-0914 Pre-series version 143
Display in the
SimpleBox
Fault
Text in the ParameterBox
Cause
Remedy
Group Details in
P700[-01] /
P701
E008 8.0 Parameter loss
(maximum EEPROM value
exceeded) Error in EEPROM data
Software version of the stored data set not compatible with
the software version of the FI.
NOTE: Faulty parameters are automatically reloaded
(default data).
EMC interferences (see also E020)
8.1 Inverter type incorrect EEPROM faulty
8.2 External copying error --
8.3 EEPROM KSE error
(Customer interface incorrectly
identified (customer’s interface
equipment))
The upgrade level of the frequency inverter was not
correctly identified.
Switch mains voltage off and on again.
8.4 Internal EEPROM error
(Database version incorrect)
8.7 EEPR copy not the same
E009 --- Reserved