2 adapters for different motors – NORD Drivesystems BU0180 User Manual
Page 20
SK 180E Manual for frequency inverters
20
Pre-series version
BU 0180 GB-0914
2.1.2
Adapters for different motors
In some cases, the terminal box attachments are different for different sizes of motor. Therefore, it may be
necessary to use an adapter to mount the frequency inverter.
In order to guarantee the maximum protection class IP55 / IP66 of the entire unit, motor must also have a
corresponding protection class.
NORD motor sizes
Add-on
SK 1x0E Size 1
Add-on
SK 1x0E Size 2
Size 63
– 71
with adapter kit I
with adapter kit I
Size 80
– 112
Direct mounting
Direct mounting
Overview of adapter kits
Designation
Add-on SK 1x0E
Part No.
Adapter kit size 63-71 to KK80-112
(Adapter kit I)
Adapter plate, terminal box frame seal and screws
275119050
Adapter plate
Seal
Motor Size 71
Inverter
SK 1x0E
Example
NOTE
The adaptability of motors from other manufacturers must be checked individually!
Information for the conversion of inverter-controlled drive units to the SK 1xxE can be found in
BU0320.