Intended use of the frequency inverter – NORD Drivesystems BU0180 User Manual
Page 4
SK 180E Manual for frequency inverters
About this document
4
BU 0180 GB-0914
Intended use of the frequency inverter
Compliance with the operating instructions is essential for fault-free operation and the
acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
Frequency inverters are devices for industrial and commercial plants for operating three-
phase asynchronous motors with squirrel-cage rotors. These motors must be suitable for
operation with frequency inverters, other loads must not be connected to the devices.
Frequency inverters are devices for fixed installation on motors or in systems in the vicinity
of the motors to be operated. All details regarding technical data and permissible
conditions at the installation site must be complied with.
Commissioning (commencement of the intended use) is not permitted until it has been ensured
that the machine complies with the EMC Directive 2004/108/EEC and that the conformity of
the end product meets the Machinery Directive 2006/42/EEC (observe EN 60204).
Getriebebau NORD GmbH & Co. KG, 2014