Yokogawa Value Series FX1000 - Manual (Page 77)

3-4 IM 04L21B01-01EN
• First-CH, Last-CH
Select the target channels.
• Range > Mode
Settings Description
Skip Not measured.
Volt, TC, RTD, DI, 1-5V Input type. Represents DC voltage, thermocouple, RTD, ON/OFF
input, and 1-5V inputs, respectively.
Delta, Scale, Sqrt Difference computation, linear scaling, and square root computation.
Set the items with check marks in the table below according to the mode value.
Setup Item Mode
Volt TC RTD DI Delta Scale Sqrt 1-5V Skip
Type  
Range        
Span Lower        
Span Upper        
Scale Lower   
Scale Upper   
Unit   
Ref.CH 
Low-cut  
Low-cut value 
3.3 Setting the Input Range