Yokogawa Value Series FX1000 - Manual (Page 30)

1-21
IM 04L21B01-01EN
Overview of Functions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
• Display Modes
You can switch the bar graph between single graph and dual graph display.
Single graph display
Dual graph display (Shows the data from
two consecutive periods)
Status Display
The following displays are available.
For the operating procedure, see section 4.5.
• Relay Status Display
Displays the status of the alarm output relay and internal switch.
• Modbus Client Status Display (/C7 option) and Modbus Master Status
Display (/C2 and /C3 options)
Display the command status.
Log Display
Displays various logs (operation log).
For the operating procedure, see section 4.9.
Log Type Description
Login Log of login/logout, log of time setting, and log of power failure
Error Log of error messages
Communication 1 Log of communication commands
FTP transfer 2 Log of FTP transfers
WEB 2 Log of Web operations
E-mail transmission 2 Log of e-mail transmissions
SNTP 2 Log of accesses to the SNTP server
DHCP 2 Log of DHCP server access
MODBUS 1 Log of communications using Modbus client or Modbus master
1 /C2, /C3, and /C7 options
2 /C7 option
Other Useful Functions
• Automatically Reverting to the Specified Display
Show a preset display when there is no operation for a specific time.
For the setting procedure, see section 5.14.
• Customizing the Menus
You can change the contents of the Function menu, which is displayed when you
press FUNC, and the display selection menu, which is displayed when you press
DISP/ENTER.
For the setting procedure, see section 5.16.
1.3 Display