Yokogawa Value Series FX1000 - Manual (Page 37)

1-28
IM 04L21B01-01EN
Saving Data to the External Storage Medium
You can only use this feature on FXs that have a CF card slot or USB interface (/USB1
option).
For the setting procedure, see section 6.2. For operating instructions, see section 6.4.
• Type of External Storage Medium
• CF card (32 MB or more)
• USB flash memory (/USB1 option)
• Auto Save
Have the CF card inserted in the slot at all times. The data in the internal memory is
automatically saved to the CF card.
Auto Save Timing
Data Type Description
Display data The file is saved when the file is created.
Time
Save data to an external storage medium
File File File
Event data Same as the display data.
Manual sampled data The first time manual sample is executed, a manual sampled data
file is created on the CF card. The data is appended to this file for
each subsequent manual sample operation. A new file is created after
manual sampled data has been stored 100 times.
For operating instructions, see section 6.5.
Report data The first time report data is generated, a report data file is created on
the CF card and report data is stored. The report data is appended to
this file every time of report.
Dividing of the report files
The appending of the report data to the file is stopped at a specified
time, and subsequent reports are saved to a new file. The file is
divided in the unit shown in the table below. Also, when recording is
stopped (memory stop), all report files are divided.
For the setting procedure, see section 9.5.
Report Type Report File
File for Each Type Combine
Hourly report hourly reports of a day hourly reports of a day
Daily report daily reports for a month daily reports for a month
Hourly and daily
reports
a file for each daily report hourly reports for a day and a daily
report hourly reports for a day
daily and weekly
reports
a file for each weekly report daily reports for a week and a
weekly report daily reports for a week
Daily and monthly
reports
a file for each monthly report daily reports for a month and a
monthly report daily reports for a month
Save Destination
CF card.
Data Save Destination Directory
You can set the data save destination directory name (DATA0 by default). The
specified directory is created on the CF card, and the data is saved in the directory.
Save Operation (If Media FIFO Is Disabled)
The data in the internal memory can be saved only if there is sufficient free space on
the CF card. Replace the CF card and save the data before the data in the internal
memory is overwritten.
1.4 Data Storage Function