Yokogawa Value Series FX1000 - Manual (Page 178)

6-9
IM 04L21B01-01EN
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
6.4 Starting and Stopping Recording and Saving
Measured Data
This section explains how to start recording and save measured data to the internal
memory.
You can also save the measured data that is stored in internal memory to an external
storage medium.
* This is only valid on FXs that have a CF card slot or USB interface (/USB1 option).
For a description of the function, see section 1.4.
Procedure
• Starting the Recording (Memory Start)
Press START. The internal memory icon in the status display section changes from
the stop icon to memory sampling icon.
• When recording display data or event data in free mode, recording starts.
• When recording event data in trigger mode, the FX enters the trigger-wait condition.
• Applying a Trigger to Start the Recording
Carry out the procedure below when the FX is waiting for a trigger.
Trigger through Key Operation
The procedure below can be carried out when recording event data in trigger mode
and the FX is configured so that the start trigger is applied through key operation.
1. Press FUNC.
The Function menu appears.
2. Press the Trigger soft key.
The recording starts.
Trigger by an Event (Event action function must be configured. See
section 7.1.)
Recording starts when an event occurs.
• Automatically Saving Measured Data
Automatic saving takes place when Auto save is set to On (see section 6.2 for details).
The save destination is the CF card.
* This is only valid on FXs that have a CF card slot.
Have the CF card inserted in the slot at all times. While the memory sampling is in
progress, the measured data recorded in the internal memory is automatically saved
to the CF card.
Action when Media FIFO is not enabled: If data is not completely saved to the external
storage medium such as due to insufficient free space, the next time that data is
automatically saved, the unsaved data will be saved.