Yokogawa Value Series FX1000 User Manual
Page 68
Common Operations
IM 04L21B01-01EN
2-9
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
2.8 Initializing Settings and Clearing the Internal
Memory
Initialize the settings to default values. In addition, clear the data in the internal memory.
For the default settings, see appendix 4.
Setup Screen
Press
MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the
File/Initialize tab
1
>
Initialize.
1 On FXs that do not have a CF card slot or USB interface (/USB1 option), this is the Initialize
tab.
Setup Items
• Initialize
Settings
Description
Clear 1
Returns the basic setting mode and setting mode settings to their default values
and clears the data in the internal memory (measured data and computed data).
Clear 2
Returns the setting mode settings to their default values and clears the data in
the internal memory (measured data and computed data).
Clear 3
Clears the data in internal memory (measured data and computed data).
* Data in internal memory that is cleared: display data, event data, manual sampled data, report
data (/M1, /PM1, and /PWR1 options), and log information.
1.
Press the
Clear 1, Clear 2, or Clear 3 soft key.
2.
Press
DISP/ENTER.
A confirmation window opens.
3.
Select
Yes and press DISP/ENTER.
The specified operation is executed, and the FX returns to the operation mode.
If you do not want to initialize, select
No and press DISP/ENTER.