Yokogawa Value Series FX1000 - Manual (Page 24)

1-15
IM 04L21B01-01EN
Overview of Functions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
• Alarm Indication
The alarm mark and measured values are displayed in the following ways depending
on the alarm status.
Alarm
Release
Alarm ACK Alarm ACK
Occurrence
When indication is
set to non-hold
When indication
is set to hold
Red Blue Red Blue Red Red Blue Blue Blue Blue Blue Measured
value
Blinking
red
Blinking
green
Blinking
red
Green Red Red Green Green Green Green Green Alarm mark
Bar Graph Display
Waveform data is displayed in a bar graph. For the operating procedure, see section 4.2.
Horizontal
Vertical
Alarm point mark
Scale marks
Bar (displayed with
the set channel color)
Measured value
Unit of measurement
and lower limit
Upper limit
Tag or channel number
Alarm mark
The bar graph base position is set
to Normal, Lower, or Upper.
Bar graph base position is set to
Center.
See section 5.7
See section 5.11
See section 5.10
See section 5.11
Bar graph base position is set to Center.
See section 5.11
See section 5.11
• Updating of the Bar Graph
The bar graph is updated at the same interval as numeric values.
• Alarm Indication
The alarm mark, alarm point mark, 1 and measured values are displayed in the
following ways, depending on the alarm status.
Alarm
Release
Red Green Red Green Red Red Green Green Green Green Green
Alarm ACK Alarm ACK
Occurrence
When indication is
set to non-hold
When indication is
set to hold
Point mark 1
Red Blue Red Blue Red Red Blue Blue Blue Blue Blue
Measured
value
Blinking
red
Blinking
green
Blinking
red
Green Red Red Green Green Green Green Green Alarm mark
1 Displayed when you are configuring alarms
1.3 Display