Dc/ac 24 v power supply (/p1), Log scale (/lg1) – Yokogawa Value Series FX1000 User Manual
Page 279
13-14
IM 04L21B01-01EN
DC/AC 24 V power supply (/P1)
Item
Specifications
Rated supply voltage
24 VDC and 24 VAC (50/60Hz)
Allowable power supply voltage range
21.6V to 26.4 VDC/AC
Insulation resistance
Between power terminal and earth: 20 MΩor greater at 500 VDC.
Withstand voltage
Between power terminal and earth: 500 VAC at 50/60 Hz for one minute
Rated power supply frequency (for AC)
50/60 Hz
Allowable power supply frequency range (for AC)
50 Hz ±2%, 60 Hz ±2%
Power supply fluctuation:
With variation within 21.6 to 26.4 VDC/AC: ±1digit or less
Power supply frequency fluctuation (for AC):
With variation of ±2 Hz from rated power supply frequency: ±(0.1% of rdg+1digit) or less
Rated power consumption 18 VA (for DC), 30 VA (for AC)
Power consumption
Supply voltage
LCD backlight off
Normal
Maximum
24 VDC
5 VA
7 VA
18 VA
24 VAC (50/60Hz)
8 VA
12 VA
30 VA
Log Scale (/LG1)
Item
Specifications
Function
A logarithmic voltage that has been converted from a physical value is applied to the FX, and then
the FX’s Log scale (logarithmic scale) is used to display and record the physical value.
Input type
Log input: Logarithmic input (LogType1)
Log linear input: Input that is linear on a logarithmic scale (LogType2)
Pseudo log input: An input that supports pseudo logs. (LogType2)
Nonlinear log input: An input that supports nonlinear logs on which calibration correction (/CC1
option) is applied.
Calibration correction is performed using voltage values. (LogType1)
Range
20 mV, 60 mV, 200 mV, 2 V, 6 V, 20 V, 50 V, and 1 V
Unitl
Up to 6 characters
Scalable range
Log input (LogType1)
1.00E–15 to 1.00E+15 (15 decades maximum)
Lower limit mantissa range: 1.00 to 9.99. Upper limit mantissa range: 1.00 to 9.99.
Scale_L < Scale_U
If the lower limit mantissa is 1.00, the difference between the exponents must be 1 or more.
If the lower limit mantissa is a value other than 1.00, the difference between the exponents must
be 2 or more.
Log linear input/Pseudo Log Input (LogType2)
Lower limit mantissa range: 1.00 to 9.99. Upper limit mantissa range: N/A (the value is the same
as the lower limit mantissa).
If the lower limit mantissa is 1.00, the value must be between 1.00E–15 and 1.00E+15, the
difference between the exponents must be 1 or more, and the maximum decades is 15.
If the lower limit mantissa is a value other than 1.00, the value must be between 1.01E–15 and
9.99E+14, the difference between the exponents must be 1 or more and the maximum decades is 14.
Alarm
Kind
High limit, low limit, delay high limit, and delay low limit
Range
1.00E–16 to 1.00E+16, mantissa: 1.00 to 9.99
Hysteresis
0% (fixed)
Color scale band range
1.00E–16 to 1.00E+16, mantissa: 1.00 to 9.99
The display position lower limit must be less than the display position upper limit.
Number of mantissa display digits
2 or 3
13.5 Options