Yokogawa Value Series FX1000 - Manual (Page 165)

5-24
IM 04L21B01-01EN
5.14 Automatically Switching Back to the Default
Display
Show a preset display when there is no operation for a specific time.
Setup Screen
Press MENU (to switch to setting mode), and select the Menu tab > Display >
Monitor.
Setup Items
• Monitor > Jump default display
Returns to a preset display if there is no key operation for a specific time.
Settings Description
1min to 1h Time until switching the display.
Off Disables the function.
Procedure
• Specifying the Display to be Shown
1. Show the operation display you want to designate.
2. In the operation mode, press FUNC.
The Function menu appears.
3. Press the Standard display soft key.
The display is registered.