Yokogawa Value Series FX1000 - Manual (Page 159)

5-18
IM 04L21B01-01EN
5.10 Changing the Display Layout, Clearing of the
Waveform at Start, Message Display Direction,
Waveform Line Width, and Grid
Change the display layout, clearing of the waveform at start, waveform line width, and
grid.
For a description of the function, see section 1.3.
Setup Screen
Press MENU (to switch to setting mode), and select the Menu tab > Display > Trend.
Setup Items
• Trend > Direction
Set the display direction of the trends to Horizontal, Vertical, or Wide.
• Trend > Trend clear
Settings Description
On Clears the displayed waveform when the memory sampling is started.
Off Does not clear the waveform when the memory sampling is started.
• Trend > Message direction
Set the display direction of messages to Horizontal or Vertical. When the trend is set
to Vertical, the message direction is fixed to Horizontal.
• Trend > Trend line
Set the line width of the trend in dots (1 to 3).
• Trend > Grid
Select the number of grids to be displayed in the waveform display area of the trend
display.
Settings Description
4 to 12 Displays a grid that divides the display width into 4 to 12 sections.
Auto Displays the same number of grids as the number of scale divisions of the first
assigned channel of the group. When the target channel is set to Log scale (/LG1
option), the logarithmic grid is used.