6 displaying channels in display zones, 6 displaying channels in display zones -10 – Yokogawa Value Series FX1000 User Manual

Page 151

5-10

IM 04L21B01-01EN

5.6 Displaying Channels in Display Zones

Specify a waveform display zone for each channel so that waveforms do not overlap.
For a description of the function, see section 1.3.

Setup Screen

Press

MENU (to switch to setting mode), and select the Menu tab > Meas channel >

Zone, Scale

Setup Items

• First-CH, Last-CH

Select the target channels. The target channels are common with the other items that

are displayed on the screen.

• Zone > Lower, Zone > Upper

Sets the zone in which the waveform is displayed. You can set

Lower and Upper as

a position (%) when taking the maximum display width to be 100%. Set

Upper greater

than

Lower, and the zone width (Upper – Lower) greater than or equal to 5%.

Lower: 0 to 95%
Upper: 5 to 100%