Yokogawa Value Series FX1000 - Manual (Page 132)

Switching Operation Screens
4-23
IM 04L21B01-01EN
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
• Saving the Data
Save the data in the internal memory to the CF card or the USB flash memory (/USB1
option).
For a description of the function, see section 1.4.
1. Press DISP/ENTER to show the display selection menu.
2. Press the right arrow key to display the sub menu.
3. Select DATA SAVE MODE with the up and down arrow keys.
4. Press DISP/ENTER.
The display switches to DATA SAVE MODE (a string indicating this mode is displayed in the
upper left of the screen).
5. To save a specified file, select it with the cursor. This operation is not necessary in
other cases.
Cursor
(move with the arrow keys)
6. Press DISP/ENTER to show the display selection menu.
7. Use the up and down arrow keys to select SELECT SAVE, ALL SAVE, M.
SAMPLE SAVE, or REPORT SAVE.
8. Press DISP/ENTER.
* If you are using a CF card and a USB flash memory (/USB1 option), the message “Which
media do you want save to?” appears. Select the destination medium using the arrow keys,
and press DISP/ENTER.
The measured data is saved.
Note
To abort the data saving operation in progress, carry out the procedure below.
Press
FUNC and press the Save Stop soft key.
4.8 Using the Memory Summary