Yokogawa Value Series FX1000 - Manual (Page 149)

5-8
IM 04L21B01-01EN
• Writing Free Messages
Create a message on the spot and write it.
1. Display the group to write the message.
2. Press FUNC.
The Function menu appears.
3. Press the Free message soft key.
4. Press a message number soft key.
The message entry window appears.
5. Enter the message. (up to 32 characters,
A a # 1
)
6. Select ENT and press DISP/ENTER.
A message mark, time, and message are shown on the trend display.
• Writing Add Messages
Add messages to the past data positions. This operation can be carried out on the
past section of the data that is currently being memory sampled.
1. Carry out the procedure below to show the historical trend of the data that is
currently being memory sampled.
Press DISP/ENTER and select TREND HISTORY > (group name) > DISP/ENTER
2. Press the arrow keys to move the cursor to the position you want to write the
message.
3. Write the message according to the procedure given in “Writing Messages” or
“Writing Free Messages.” Use the Add Message or Add Free Message soft key.
Add message
Cursor
(yellow line)
Explanation
• Display Color of Messages
The message colors on the trend display are shown below. You cannot change them.
No. 1 2 3 4 5 6 7 8 9 10
Color Red Green Blue Blue violet Brown Orange Yellow-green Light blue Violet Gray
The colors for messages 11 to 100 are repetitions of the colors above.
• Add Message
• The message timestamp is the time that the message is written. It is not the time
stamp of the data at the position where the message is written.
Add message (displayed in blue)
Display example on the message
summary
• Up to 50 messages can be written.
• Messages cannot be added to data in the internal memory that has already been
saved to a file or data that has been loaded from the external storage medium.
5.4 Writing Messages