Yokogawa Value Series FX1000 - Manual (Page 182)

6-13
IM 04L21B01-01EN
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
6.5 Manually Saving the Measured Data (Manual
Sample)
Save the instantaneous values of all channels (excluding those set to Skip or Off)
through key operation.
For a description of the function, see section 1.4.
Procedure
1. In the operation mode, press FUNC.
The Function menu appears.
2. Press the Manual sample soft key.
Manual sampling is executed.
Explanation
• Number of Manual Sampled Data Set in the Internal Memory
The number of manual sampled data set in the internal memory is displayed on the
memory summary display (see section 1.3)
• Saving Manual Sampled Data
* This is only valid on FXs that have a CF card slot or USB interface (/USB1 option).
• If auto save is On, the manual sampled data is saved to the CF card when you
carry out manual sampling.
• If Auto save is set to Off, save the manual sampled data to the CF card or USB
flash memory (/USB1 option) according to the procedure for manually saving the
data (see section 6.4).
• You can save the manual sampled data to the CF card or USB flash memory (/
USB1 option) according to the procedure for manually saving the data (see section
4.8) regardless of the Auto save setting.
• Manual sampled data is saved as a tab-separated text file (see appendix 3).
Note
Even if the FX does not have a CF card slot, you can still execute manual sampling.
However, you cannot load data. To load data, the FX must be equipped with a
communication interface (/C2, /C3, or /C7 option) or the USB interface (/USB1 option).