Yokogawa Value Series FX1000 - Manual (Page 145)

5-4
IM 04L21B01-01EN
5.3 Setting the Trend Interval and Switching to the
Secondary Trend Interval
Set the trend interval. Switch the trend interval to the secondary trend interval while the
memory sampling is in progress. Automatically write messages when the trend interval is
switched.
For a description of the function, see section 1.3.
Setup Screen
• Switching the Trend Interval and Writing Messages (When Using the
Secondary Trend Interval)
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > View, Message.
• Trend interval [/div] and Secondary interval [/div]
Press MENU (to switch to setting mode), and select the Menu tab > Display > Trend/
Save interval.
Setup Items
• View > Trend rate switching
On: Enables the function that switches the trend interval while the memory sampling
is in progress. The “Second interval [/div]” item is displayed in the setting mode.
* When the trend rate switching function is On, the FX cannot be configured to record both the
display and event data (see section 6.1).
• Message > Change message
On: Writes the time the interval is switched and the new trend interval as a message
when the trend interval is switched.