Yokogawa Value Series FX1000 - Manual (Page 46)

1-37
IM 04L21B01-01EN
Overview of Functions
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
Miscellaneous
• Limitations on the Combinations of Events and Actions
The combinations that are checked in the table below can be used.
Event
Action
Remote Output
Relay
Internal
Switch
Timer Match
Time
Timer
Alarm User
Key
Alarm ACK    
Reset the relative timer      
Load the settings 
Adjust the time 
Other actions       
• Level and Edge
The combinations of events and actions are summarized in the figure below.
Type Operation
Level
Level
State 1
State 2 Operation
executed
Operation
executed
Edge Edge
Edge
Event
Action
Event Action Example
The following is an example for when the event is Internal switch (Level or Edge) and
the action is Memory start/stop (Level) or Manual sample (Edge).
Event Action
Operation
OFF
ON
Memory start Memory stop
Execution Execution
Edge Level
Event
(internal switch)
Action
Memory start/stop Manual sample
Level and Edge of the Remote Control Input Signal
Level Edge
ON
OFF
250 ms or more
For contact inputs, the remote signal rises when the contact switches from open to
closed and falls when the contact switches from closed to open. For open collector
signals, the remote signal rises when the collector signal (voltage level of the remote
terminal) goes from high to low and falls when the collector signal goes low to high.
1.6 Event Action and Remote Control Functions (/R1 and /PM1 Options)