Yokogawa Value Series FX1000 - Manual (Page 134)

Switching Operation Screens
4-25
IM 04L21B01-01EN
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
4.9 Displaying a List of Operation Logs
Displays the following operation logs.
Login log, error log, communication log, FTP log, Web log, e-mail log, SNTP log, DHCP
log, and Modbus status log
Procedure
• Displaying the Log
1. Press DISP/ENTER to show the display selection menu.
2. Press the up and down arrow keys to select LOG.
* LOG is not displayed with the default settings.
To show
LOG on the menu, see section 5.16.
3. Press the right arrow key to display the sub menu.
4. Press the up and down arrow keys to select the sub menu item.
To close the menu without changing the displayed contents, press the ESC key.
5. Press DISP/ENTER.
The display appears.
Explanation
• Login Log
The log number of the last line and the
total number of logs
User name
Operation method (see the table below)
Operation (see the table below)
Date/time
Action Description
Login Login
Logout Logout
NewTime Time change while memory is stopped
TimeChg Time change through key operation
PowerOff Power OFF (power failure occurred)
PowerOn Power ON (recovered from a power failure)
TrevStart Start the operation of gradually adjusting the time
TRevEnd End the operation of gradually adjusting the time
SNTPtimset Time change by SNTP
TimeDST Switch the daylight savings time