Yokogawa Value Series FX1000 - Manual (Page 223)

9-18
IM 04L21B01-01EN
Setup Items
• Report > Report select > 1, 2, 3, and 4
Select the type of data to output as reports. The only data type that can be set more
than once is Off. You cannot set 1 to Off.
Settings Description
Off Does not output reports.
Ave Outputs the average value.
Max Outputs the maximum value.
Min Outputs the minimum value.
Sum Outputs the sum value.
Inst Outputs the instantaneous value.
• Report > File type
Set this item when creating two types of reports such as daily report and monthly
report.
Settings Description
Separate Saves each type of report to a separate file. For information about how files are
divided, see section 1.4.
Combine Saves two types of report data in a single file.
• Report set > Report kind
Select the type of report to be created.
Settings Description
Hour Creates hourly reports.
Day Creates daily reports.
H+D Creates hourly and daily reports.
Day+Week Creates daily and weekly reports.
D+M Creates daily and monthly reports.
• Report set > Basic setting > Date/Day of the week, Time (hour)
Set the date or day of the week and the time when the report is to be created. The
specified date/time is when the report file is divided. Set the values in the range
indicated below. Items with a dash are invalid.
Report Type Date Day of Week Time
Hour - - 0 to 23
Day 1 to 28 * - 0 to 23
H+D - - 0 to 23
Day+Week - SUN to SAT 0 to 23
D+M 1 to 28 * - 0 to 23
* You cannot specify 29, 30, or 31.
Report Time and Date/Time When the Report File Is Divided
Example: When the Date of a daily report is set to 1 and the Time (hour) is set to
18:00
A daily report is created every day at hour 18.
The file storing the report is divided at 18:00 on day 1 of each month.
9.5 Creating Reports