Yokogawa Value Series FX1000 - Manual (Page 59)

1-50
IM 04L21B01-01EN
• DST (Daylight Saving Time)
If you are using the FX in an area with daylight saving time, enter the daylight
saving time starting and ending dates, and the FX will automatically change the time
accordingly.
For the setting procedure, see section 2.1.
System Display
This displays the total number of inputs on the FX, the size of the internal memory, the
communication functions, the external storage drive, the options, the MAC address, and
the firmware version number.
For the operating procedure, see section 2.5.
Language
The displayed language can be set to English, Japanese, German, French, Chinese,
Italian, Spanish, Portuguese, Russian, and Korean.
For the setting procedure, see section 2.6.
24 VDC Power Supply for Transmitter (/TPS2 or /TPS4 Option)
Provides 24-VDC power supply to up to two (/TPS2) or four (/TPS4) two-wire system
transmitters. The measured values of the transmitter correspond to a current signal of
4 to 20 mA on the same cable. Therefore, the signal can be connected to the FX input
terminal and displayed.
–
+
+
–
Transmitter
Current
FX
Transmitter power
supply output terminal
Input terminal
Shunt resistor: 250 Ω
USB Interface (/USB1 option)
You can connect a keyboard or a USB flash memory device to the USB port on the front
of the FX.
• You can operate the FX using a keyboard.
• You can save measured data and setup data to the USB flash memory and also load
from it.
For the operating procedure, see sections 2.10 and 2.11.
1.10 Other Functions