IAI America XSEL-S - Manual (Page 25)

4. Installation
19
4.3.2 Keyence Camera
The camera manufactured by Keyence Corporation that is applicable for Vision System is
“In-CV-2000/CV-3000/CV-5000/XG-7000” only.
The way to install the camera can be selected from mounting on the robot and fixing on the
equipment.
Install the camera considering how to use it.
Lighting equipment is separately required when capturing an image with the camera.
12 pieces (0 to 7 pieces for CV-2000) of works can be identified at maximum in 1 shot.
Shown below is an example of the basic construction of Vision System with one unit of camera
connected.
XSEL P/Q Controller Main Unit or Hub, etc.
Camera Cable
Camera Controller Monitor
24V DC Power Supply
SD Card
(Inserted to SD1 Slot
on the main unit of controller)
Lens
Camera
Camera Controller
Main Body
Console
Example for Keyence Camera Controller Basic Construction