IAI America XSEL-S User Manual
Page 117
8.
Appendix
111
Ɣ Method to put the coordinate data in order on In-Sight Explorer and output as a result
(Note) For the details, refer to Cognex Instruction Manual or the enclosed data (Sample.job).
ڏ
Please contact IAI for a program file you need.
(1) Select Application Steps Inspect Pact in In-Sight Explorer.
(2) Select Math from Add Tool and click the “Add” button.
(3) From the function select under the formula, select Text Stringf and click “Insert”.
(4) For the content of the formula, fill in as shown below, or select the detection coordinates to
insert.
Stringf (“%+09.3f%+09.3f%+09.3f, Detection coordinate nY, Detection coordinate nX,
Detection coordinate nT)
(5) Repeat the steps 3) and 4) for the number of times for the number of the maximum
detectable n (8 pieces at maximum) of the used device.
(Example) When PatMax (1 – 10) is used for detection
Math_1:
Stringf(“%+09.3f%+09.3f%+09.3f,Pattern_2.Fixture.Y, Pattern_2.Fixture.X, Pattern_2.Fixture.Angle)
Math_2:
Stringf(“%+09.3f%+09.3f%+09.3f,Pattern_2.Fixture1.Y, Pattern_2.Fixture1.X, Pattern_2.Fixture1.Angle)
Math_3:
Stringf(“%+09.3f%+09.3f%+09.3f,Pattern_2.Fixture2.Y, Pattern_2.Fixture2.X, Pattern_2.Fixture2.Angle)
•
•
Select Detection Tool and the
detection coordinates become
available to select.
(1)
(2)
(3)
(4)
(5)
(6)