IAI America XSEL-S - Manual (Page 24)

4. Installation
18
4.3 Installing the Camera
4.3.1 Cognex Camera
The camera products of Cognex Corporation applicable to the vision system are limited only to
“In-Sight EZ110 (EZ110-XL)” and “In-Sight 5000 Series”.
The way to install the camera can be selected from mounting on the robot and fixing on the
equipment.
Install the camera considering how to use it.
Lighting equipment is separately required when capturing an image with the camera.
It is possible to identify the following numbers of work pieces in 1 shot of image capturing.
• In-Sight EZ110 (EZ110-XL) : 8 pieces at max.
• In-Sight 5000 Series
: 12 pieces at max.
Refer to the following Cognex instruction manuals for the details of how to connect the devices.
• In-Sight EZ110 (EZ110-XL) : “In-Sight EZ Series Vision System Installation Guide”
• In-Sight 5000 Series
: “In-Sight 5000 Series Vision System Installation Guide”
“CIO-1400C I/O Expansion Module Instruction Manual”
Shown below is an example of the basic construction of Vision System with one unit of camera
connected.
XSEL P/Q Controller Main Unit
Hub
100V AC Power Supply
PoE Injector
Camera
Camera
Cable
Example for Cognex Camera Controller Basic Construction