IAI America XSEL-S - Manual (Page 115)

7. Error
T
reatment
109
7.3 Return Code List in READ Command (SEL Language)
Execution
If an error is occurred during the READ Command, the return code is stored to the Calibration
Process Status Monitor No.1055.
The return codes are listed below. Check the detail to take an appropriate counteraction.
Return
Code
Description and Treatment
0 READ Command completed in normal condition
1
Reception Time Out
The timeout duration is determined in TMRD or TMRW Command.
The reception will continue even though the return code is not returned.
2
Reception Timer Cancel
The condition in waiting is cancelled in the timer duration determined in TMRD or TMRW
Command.
3
Reception Overrun
The process of sending data was not made in time. Increase the process time by such way as
reducing the communication speed.
4
Framing Error or Parity Error
Framing Error : Data other than the specified format was received. Check the settings of
such parameters as parity and data bit length. If the problem cannot be
solved, also consider the influence of noise. Check the cable wires and their
shield treatment.
Parity Error : There was an error in the sent data.
Influence of noise can be considered. Check the cable wires and their shield
treatment.
5
Read Factor Error
The communication circuit was compulsorily shut down. Reboot the XSEL power.
Please contact us if the problem is not solved with this action.
6
Lead Task Complete
Program stopped while READ Command was executed.
7
Receive Error
There was an error in the receiving process for some reason.
Reboot the XSEL power.
Please contact us if the problem is not solved with this action.
8
9
10
11
12
These numbers are not in use.
13
14
15
16
17
18
19
20 Ethernet Related Error
Close the circuit once and reopen it.
Please contact us if the problem is not solved with this action.
21
Temporary QUE Overflow
An overflow was occurred in the communication circuit memory. Reboot the XSEL power.
Please contact us if the problem is not solved with this action.
22
Receive QUE Overflow
An overflow was occurred in the received data storage area.
Try to reduce the communication speed.
50 to Please contact us.