IAI America XSEL-S - Manual (Page 119)

8.
Appendix
113
(11) Following the table for EZ-110XL settings in Section 8.1, input and select the necessary data.
(Note) For the details, refer to Cognex Instruction Manual or the enclosed data (Sample.job).
Click “OK”.
(12) Select TCP/IP Settings tag in TCP/IP Setting window.
(13) It is not necessary to input the Server Host Name.
(14) Put the same value to Port as the one input to XSEL I/O Parameter No. 164.
(15) Select CR(13) for Terminator.
Input <00 (Fixed value)
Click Add and the values
available for output can be
selected as the result of the
detection tool and calculation
tool.
(1) Select the number of
detection from the detection
tool and set it.
• Label to be excluded
(put no tick mark)
• Data Type is Integer
• Tick in Fixed Width box and
put 2 to Field Width and the
top 0 to Pad.
(2) Select the calculation result
from the calculation tool and
set it.
• Label to be excluded
(put no tick mark)
• Data Type is Integer
• Tick in Fixed Width box and
put 2 to Field Width and the
top 0 to Pad.
* For the label, input 2
characters for the capturing
work attribute. (If there is
none, input 00.)
(14)
(13)
(15)
(12)
3000