IAI America XSEL-KET - Manual (Page 382)

363
Appendix
INTELLIGENT ACTUATOR
Other Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
21 Manual operation
type
0 0 ~ 5 0: Always enable edit and SIO/PIO start (Initial condition
after connection = With safety speed)
1: Select edit and start (with password) (EU, etc.)
2: Always enable edit and SIO/PIO start (Initial condition
after connection = Without safety speed
(cancellation)) (PC software version 1.1.0.7 or later
and TP application version 1.06 or later)
* Referenced by the PC/TP.
22 Control use region 0 0 ~ 99 0: J, 1: E, 2: EU
23 PSIZ command
function type
0 0 ~ 5 0: Maximum number of point data areas
1: Number of point data used
24 Local variable
number for storing
SEL communication
command return
code
99 1 ~ 99
1001 ~ 1099
(Main application version 0.20 or later)
25~
29
(For extension) 0
30 Option Password 00 0H 0H ~
FFFFFFFFH
HOME command option (Change prohibited)
(Main application version 0.50 or later)
31 Option Password 01 0H 0H ~
FFFFFFFFH
Reserved (Change prohibited)
32 Option Password 02 0H 0H ~
FFFFFFFFH
Reserved (Change prohibited)
33~
35
(For extension) 0H 0H ~
FFFFFFFFH
36 PC/TP data protect
setting (Program)
0H 0H ~
FFFFFFFFH
Bits 0 to 3: Protect type (0: Read/write, 1: Read only,
2: No read/write)
Bits 4 to 7: Protect release method (0: Special
operation)
Bits 8 to 11: Protect range maximum number (1’s
place, BCD)
Bits 12 to 15: Protect range maximum number (10’s
place, BCD)
Bits 16 to 19: Protect range minimum number (1’s
place, BCD)
Bits 20 to 23: Protect range minimum number (10’s
place, BCD)
* Referenced by the PC/TP (PC software version
2.0.0.42 or later and TP application version 1.09 or
later)