IAI America XSEL-KET - Manual (Page 354)

335
Appendix
INTELLIGENT ACTUATOR
 List of Parameters
If you have any question regarding changing the parameters, please contact IAI’s Sales Engineering
Section. After changing a parameter, record the new and old parameter settings.
If you have purchased the PC software, we recommend that you back up the parameters immediately
after the controller is delivered and when the system incorporating the controller is started. Since a
number of customizing settings use parameters, you should back up the parameters regularly as you
back up the programs.
To make the new parameters effective, write them to the flash ROM and then execute a software reset
or reconnect the power.
The lists below are examples of default values displayed on the PC software. The default parameter
settings vary depending on the operating condition and actuators used.
The input range represents the input limit on the teaching pendant or in the PC software. The actual
set value you enter must conform to the definition in the Remarks field.
Values other than those defined in the Remarks field, including values within the input range, are for
future extension.
Do not enter values other than those defined in the Remarks field.