IAI America PCON-CA - Manual (Page 29)

Chapter 1 Specifications Check
POWER CON
PCON-CA/CFA
21
Chapter 1 Specifications Check
1.1 Product Check
1.1.1 Parts
This product is comprised of the following parts if it is of standard configuration.
If you find any fault in the contained model or any missing parts, contact us or our distributor.
No. Part Name Model Quantity Remarks
1 Controller
Refer to “How to read the
model plate”, “How to read
the model”.
1
Accessories
2 I/O Flat Cable CB-PAC-PIO*** 1
***shows the cable length
(Example)
*** : 020 2 [m]
3 Power Connector FMC1.5/8-ST-3.5
(Supplier : Phoenix Contact)
1
Recommended cable size
AWG16 to 20
(1.25 to 0.5mm 2 )
4
Absolute Battery
(Option)
AB-7 or SEP-ABU* 1 For Simple Absolute Type
5 First Step Guide 1
6
Instruction Manual
(CD/DVD)
1
7 Safety Guide 1
1.1.2 Teaching Tool
A teaching tool such as PC software is necessary when performing the setup for position
setting, parameter setting, etc. that can only be done on the teaching tool.
Please prepare either of the following teaching tools.
No. Part Name Model
1
PC Software
(Includes RS232C Adapter Peripheral Communication Cable)
RCM-101-MW
2
PC Software
(Includes USB Adapter USB Cable Peripheral Communication
Cable)
RCM-101-USB
3 Teaching Pendant (Touch Panel Teaching) CON-PTA
4 Teaching Pendant (Touch Panel Teaching with deadman switch) CON-PDA
5
Teaching Pendant
(Touch Panel Teaching with deadman switch TP Adapter
(RCB-LB-TG))
CON-PGA