Acer AB460 F1 - Manual (Page 85)

65
Item Name Description
1 List L ogging
Enabled
Check this box to activate the event-logging list. To
show the event log list, click on E
VENT
L
OG
under
S
YSTEM
H
EALTH
.
NOTE: The maximum number of log list entries is 1,000
events. Every entry that exceeds this limit will automatically
override the oldest one in the list. If the reset button is
pressed, all logging information will be saved, however, all
logging data will be lost if a hard reset is performed or the
system loses power.
2 Entries
Shown Per
Page Enter the number of entries you want to display on
a page.
3 Clear Internal
Log Click this icon to clear the internal event log from
memory.
4 NFS Logging
Enabled Click this box to enable NFS Logging, which will
create a Network File System (NFS) for the event
logging data to be written into.
5 NFS Server Enter the IP Address of the NFS server here.
6 NFS Share Enter the path of the Network File System in which
the event logging data is stored.
7 NFS Log File Enter the filename of the Network File System in
which the event logging data is stored.
8 SMTP
Logging
Enabled Check this box to enable the SMTP (Simple Mail
Transfer Protocol) logging.
9 SMTP Server Enter the IP Address for the SMTP server.
10 Receiver
Email
Address Enter the email address that the SMTP event
logging data will be sent to.
11 Sender Email
Address Enter the email address from which the SMTP event
logging data is sent.