Acer AB460 F1 - Manual (Page 339)

319
RMON Alarm Configuration
Clicking the A
LARM
tab brings up the RMON A
LARM
C
ONFIGURATION
page,
which configures RMON Alarm paramters. The parameters for this
page are shown in the following table.
Community This parameter specifies the SNMP community string
used for this trap. This is relevant when an SNMP trap is
requested for an event. For event type to display,
TRAP
and Log and TRAP Community must be configured.
Also make sure the configured community is active
before adding an event on that community.
Owner This parameter indicates the owner of this event.
Last Time Sent This parameter denotes the time this event entry last
generated an event.
Figure 4-203. Alarm Configuration
Parameter Description
Index This parameter specifies the table index.
Parameter Description