Acer AB460 F1 - Manual (Page 307)

287
Management Security Basic Settings
Clicking the M
ANAGEMENT
S
ECURITY
tab brings up the M
ANAGEMENT
S
ECURITY
B
ASIC
S
ETTINGS
page. This page allows you to setup the below
listed basic security parameters see the following table.
Administrative users can also create Enable Passwords in this page. Low
privilege users can use these Enable Passwords in the W
EB
S
ETTINGS
page
to enable access to privilege configurations.
Administrative users can set an Enable Password for all privilege levels.
By default, the Enable Password is set only for the highest level
(Level_15). This default password is the same as the default password
set for the root user login.
Figure 4-177. Management Security Basic Settings
Parameter Description
Authentication
mode Use this parameter to choose the mode of
authentication for management access. By default the
management access is authenticated with L
OCAL
user
accounts information. However you can choose to
authenticate using
Radius or TACACS instead.
Authentication
traps You can enable SNMP Traps for SNMP access
authentication events using this parameter..