Acer AB460 F1 User Manual
Page 356
4 Networking Switch Modules
336
Stack MAC
This parameter is used to specify the MAC address of
this switch. This MAC address is used to communicate
between stack member switches.
Configured State
This parameter is used to specify the priority of this
switch.
Current State
This parameter is used to specify the current status of
this switch as
Master
or
Slave
.
Peer Status
– The following parameters display information about all
connected stack Slave switches.
Switch ID
This parameter is used to specify the switch identifier
of the Slave switch.
Stack IP
This parameter is used to specify the IP address of the
Slave switch. This IP address is used to communicate
between stack member switches.
Stack MAC
This parameter is used to specify the MAC address of
the Slave switch. This MAC address is used to
communicate between stack member switches.
Switch State
This parameter is used to specify the current status of
the Slave switch.
Card Name
This parameter is used to specify the type of Slave
switch.
Parameter
Description