Acer AB460 F1 - Manual (Page 483)

463
PIM
The PIM link allows you to perform PIM related configuration through
the following pages:
•
“Basic Settings” on page 463
• “Component” on page 464
• “Interfaces” on page 465
• “Candidate RPs” on page 466
• “Threshold” on page 467
• “Static RP” on page 468
Basic Settings
Clicking the B
ASIC
S
ETTINGS
tab brings up the PIM B
ASIC
S
ETTINGS
page,
which specifies the PIM status in the switch. The parameters for this
page are shown in the following table.
Parameter Description
PIM Status This parameter allows you to enable or disable the PIM
status in the switch.
PIM V6 Status This parameter allows you to enable or disable the PIM
V6 status in the switch.