Acer AB460 F1 - Manual (Page 472)

4 Networking Switch Modules 452
Operational Status This parameter enables or disables IGMP snooping
operationally in the switch. To enable IGS, GMRP status
must be
Disabled .
Proxy Reporting This parameter indicates whether the proxy reporting
in the IGMP snooping switch is to be enabled or
disabled.
Snooping Mode This parameter specifies the IGMP snooping multicast
forwarding mode, which can be configured using the
Destination IP Address or the Destination MAC
Address.
Report Forwarding This parameter specifies whether the IGMP reports are
forwarded on all ports or only on router ports.
Retry Count This parameter specifies the maximum number of
group specific queries sent on a port on the reception
of an IGMPv2 leave message.
Query Transmit On
TC This parameter allows you to enable or disable query
transmit when topology changes.
Parameter Description