Acer AB460 F1 - Manual (Page 598)

5 Acer Smart Blade Manager 578
CMM Setting
The CMM Setting tab provides LAN configuration, SNMP setting and
CMM information.
LAN Configuration: Shows the current CMM IP address, Acer and
Subnet Mask. The CMM IP type can be set as a DHCP or static address.
SNMP: Lets you specify the SNMP destination address to receive the
SNMP trap from the CMM. When the CMM detects a failure, it logs into
SEL and immediately sends the SNMP trap to the specified addresses.
Update the SNMP destinations by selecting one from the SNMP list. The
selected SNMP will then appear in the text field of the Selected IP.
Update the SNMP destination by clicking Update. The Community
String of the SNMP trap can also be updated.
CMM Info: Shows the firmware version and tag.
The Reset button can be used to reset the CMM. You may also view the
information and commands in the CMM module via the Blade System
tab.