Acer AB460 F1 - Manual (Page 433)

413
Area
Clicking the A
REA
tab brings up the OSPF A
REA
C
ONFIGURATION
page. The
parameters for this page are shown in the following table.
Parameter Description
Area ID This parameter specifies the identifier for the area.
Type This parameter allows you to configure the area type,
as a
Stub area , a Normal area or NSSA .
Send Summary
Router This field is used to control the import of summary LSAs
to stub areas. This does not have any impact for other
areas.
Default Cost This parameter specifies the metric/cost associated with
the routes.