Acer AB460 F1 - Manual (Page 453)

433
Clicking the L
OCAL
P
REF
tab brings up the BGP L
OCAL
P
REFERENCE
C
ONFIGURATION
page, which allows you to configure the Local
Preference value for routes. The parameters for this page are shown in
the following table.
Parameter Description
Local Preference ID This parameter specifies the Local Preference ID, which
is the index for this table.
Remote AS This parameter specifies the AS number from which the
route update is received.
IP Address Prefix This parameter specifies the IP Address prefix for which
the update is received.
IP Address Prefix
Length This parameter is used to calculate the subnet.
Intermediate AS This parameter represents the intermediate AS
between the BGP peers.
Direction This parameter can be set for the incoming or the
outgoing packets using
In and Out values.
Value This parameter specifies the Local preference value to
be associated with this learnt path.
Preference This parameter is used to enable/disable filtering.
Status This parameter specifies the status of the entry.