Acer AB460 F1 - Manual (Page 424)

4 Networking Switch Modules 404
Interfaces
Clicking the I
NTERFACE
tab brings up the RIP I
NTERFACE
page. The
parameters for this page are shown in the following table.
Parameter Description
Output-delay This parameter specifies the delay that needs to be
enabled for RIP to split the periodic update packets
before they are sent out.
Neighbor Filter This parameter enables or disables neighbor filtering.
Neighbor filtering helps you to filter routes from
specific neighbors.
Auto-summary
status This parameter enables or disables the Auto-summary
feature.
Parameter Description
Interface This parameter specifies the Interface ID for which RIP
needs to be configured.