Acer AB460 F1 - Manual (Page 361)

341
Port Basic Settings
Clicking the B
ASIC
S
ETTINGS
tab brings up the P
ORT
B
ASIC
S
ETTINGS
page,
which allows you to configure port status and mode information. This
page also helps configuring priority and MTU. The parameters for this
page are shown in the following table.
Figure 4-218. Port Basic Settings
Parameter Description
Port This displays the port number.
Link status This column shows the physical link status as an UP or
Down arrow. A green up arrow indicates that the
status of the port is up, while the red down arrow
indicates that the status of the port is down.
Admin State This parameter allows you to administratively
configure the admin state as
Up or Down .
Default User
Priority This parameter allows you to set the priority from 0 to
7 .
Switch Port By default all ports are switch ports for layer 2
switching. To configure a port as a layer 3 routed port,
choose
No .
Switch Port Mode Use this control allows to set the access mode as either
Trunk or Hybrid .