Acer AB460 F1 - Manual (Page 188)

3 Server Blades: Setup and Installation 168
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1. By pressing immediately after turning the system on, or
2. When the message Press the key to enter Setup appears briefly
at the bottom of the screen during the POST, press the key to
activate the main S
ETUP
menu:
Main BIOS Setup
All Main Setup options are described in this section.
Use the U
P
/D
OWN
arrow keys to move among the different settings in
each menu. Use the L
EFT
/R
IGHT
arrow keys to change the options for
each setting.
Press the
SC
> key to exit the CMOS S
ETUP
menu. The next section
describes in detail how to navigate through the menus.
Items that use sub-menus are indicated with the  icon. With the item
highlighted, press the
NTER > key to access the submenu.
Menu options found in the M
AIN
BIOS S
ETUP
menu are shown in
Figure 3-109 and described thereafter.