Acer AB460 F1 - Manual (Page 320)

4 Networking Switch Modules 300
IP Standard ACL
Source and
Destination MAC These fields specify both the Source MAC Address and
Destination MAC Address, for which the access list
must be applied. Both the Source and Destination MAC
Addresses must be configured for the status of the
access list to be active.
Action This parameter specifies the action to be taken for the
access list.
Priority This parameter specifies the priority for the access list.
VLAN ID This parameter specifies the VLAN ID for which the
access list has to be applied.
Port List (Incoming) This parameter specifies the Port List for which the
access list has to be applied.
Encapsulation This parameter specifies the Encapsulation type of the
packet for which the access list has to be applied.
Protocol This parameter specifies the non-IP protocol type of
the packet for which the access list has to be applied.
Figure 4-188. IP Standard ACL Configuration
Parameter Description