Acer AB460 F1 - Manual (Page 332)

4 Networking Switch Modules 312
Clicking the T
ARGET
A
DDRESS
tab brings up the SNMP T
ARGET
A
DDRESS
S
ETTINGS
page, which configures SNMP target address parameters. The
parameters for this page are shown in the following table.
Parameter Description
Target Name This parameter specifies a T
ARGET
N
AME
as a unique
identifier.
Target IP Address The T
ARGET
IP A
DDRESS
specifies a target address to be
used in the generation of SNMP operations.
Target Timeout T
ARGET
T
IMEOUT
specifies the maximum round trip for
communicating with the T
ARGET
IP A
DDRESS
.
Target Retries T ARGET R ETRIES specifies the number of attempts to be
made when no response is received
Transport Tag The T RANSPORT T AG value is used to select a target
address for a particular operation.
Param P ARAM contains SNMP parameters to be used when
generating messages to be sent to a transport address.
Storage Type Use this parameter to specify whether the S TORAGE T YPE
is volatile or non-volatile .