Acer AB460 F1 - Manual (Page 579)

559
Power Supply
Select a power supply module to display the Power Supply UI in the
Blade System tab area. This UI includes the following:
Status
Power Status: Shows the current power status.
Fan 1 Status: Shows the status of power supply fan 1 as normal or
abnormal.
Fan 2 Status: Shows the status of power supply fan 2 as normal or
abnormal.
Watts: Shows total wattage provided by this power supply.
DC current: Shows the DC current. (Only supported for 1400 W power
supplies.)
AC RMS current: Shows the AC RMS current. (Only supported for 1400
W power supplies.)
Firmware Ver: Shows the power supply's firmware version.
FRU Version: Shows the power supply's FRU version.
Centralized Power Fan Speed Control
Centralized Power Fan Speed Control is used to manage all power
supply fans in the blade server. The default is automatic fan speed
control. When in automatic mode, the CMM will monitor the system
load and optimize all fan speeds accordingly.
Manual speed fan control mode allows you to manually adjust the
speed of the power supply fans by clicking one of the arrow icons. Set
to minimum speed by clicking the icon numbered 1 and to maximum
speed by clicking the icon numbered 4. The icons numbered 2 and 3 are
for incremental increases between the minimum and maximum