Acer AB460 F1 User Manual
Page 369
349
In addition, the B
ASIC
S
ETTINGS
page provides the configuration3 of
Bridge Mode (
Customer /Provider
) and the priority for tunneled STP
BPDUs. When you configure B
RIDGE
M
ODE
TO
P
ROVIDER
, the Port Protocol
based classification and MAC-based classification on all ports must be
disabled.
Parameter
Description
Garp System
Control
This parameter starts or shuts down GARP in the
switch.
Learning Mode
This parameter specifies the Learning Mode
(
Independent, Shared, Hybrid
or
VLAN Learning
).
VLAN Version
This parameter specifies the VLAN version supported.
Maximum VLAN ID
This parameter specifies the largest (4094) valid VLAN
ID, which this switch can accept, above which all will be
discarded.
Maximum
Supported VLANs
This parameter specifies the maximum number of
VLANs that this device can scale.
Number of VLANs
in the System
This parameter specifies the active number of VLANs
configured in the device.
MAC Based on All
Ports
This parameter enables or disables the per Port MAC
based classification.
Port and Protocol
Based on all Ports
This parameter enables or disables the per Port
Protocol based classification.