Acer AB460 F1 - Manual (Page 366)

4 Networking Switch Modules 346
Rate Limiting
Clicking the R
ATE
L
IMITING
tab brings up the R
ATE
L
IMITING
page
(Figure 4-223), which allows you to configure rate limiting for the port
interface. The parameters for this page are shown in the following
table.
Figure 4-222. Rate Limiting
Parameter Description
Port This displays the port number.
The following parameters are configurable for Ingress Rate Limiting.
DLF Level This parameter allows you to specify the destination
lookup failure packets per second.
Broadcast Level This parameter allows you to specify the broadcast
packets per second.
Multicast Level This parameter allows you to specify the multicast
packets per second.
The following parameters are configurable for Egress Rate Limiting.