Acer AB460 F1 - Manual (Page 55)

35
Gigabit Switch
Click on G
IGABIT
S
WITCH
to reveal the G
IGABIT
S
WITCH
S
TATUS
screen
(Figure 2-17). The G
IGABIT
S
WITCH
option in the B
LADE
S
YSTEM
submenu
allows you to check the status of all the GbE modules in the system you
are accessing. Power status (on or off), voltage levels, temperature,
error status and initialization status are all shown in the main screen
(see the following table). In addition, the commands listed below may
be issued to the GbE module.
To perform a function, first click the box(es) next to the GbE module(s)
you wish to issue a command to and then click the command icon.
3 Power
Supply Fan
Speed
Control If you change the F
AN
C
ONTROL
option from A
UTO
C
ONTROL
to M
ANUAL
, you may alter the speed of the
power supply fans by clicking one of the fan icons. Set
to minimum speed by clicking the icon numbered “1”
and to maximum speed by clicking the icon numbered
“4”. The icons numbered “2” and “3” are for
incremental increases between the minimum and
maximum settings.
After changing the fan speed, you should see the fan
rpm change in the status screen. Settings affect all fans
simultaneously, you cannot control the speed of
individual fans.
4 Refresh
Power
Supply
Status Click to refresh the screen and update the status of the
power supplies shown.
Item Name Description