Acer AB460 F1 - Manual (Page 485)

465
Interfaces
Clicking the I
NTERFACES
tab brings up the PIM I
NTERFACE
C
ONFIGURATION
page. The parameters for this page are shown in the following table.
Candidate CRP Hold
Time This parameter specifies the hold time of the component
when it is a candidate RP in the local domain.
Mode This parameter specifies the mode of the component. It can
be
Sparse or Dense .
BSR Address This parameter specifies the IP address of the bootstrap
router for the local PIM region, which is a read-only field.
BSR Expiry Time This parameter indicates the minimum time remaining
before the bootstrap router in the local domain is declared
down, which is a read-only field.
Parameter Description
Interface This parameter specifies the interface index.
Parameter Description